佳能BJC-85 EEPROM清除

佳能BJC-85 EEPROM清除

1.按住POWER和RESUME键,插电源线,初始化后手松开.

2.按住RESUME和CARTRIDGE键,按POWER键,直到听到1长1短的蜂鸣后.

3.根据下表,按CARTRIDGE,设置相应的废墨量.

4.按RESUM键,设置相应的废墨量.

5.用POWER键关机

(如果为25%,50%或75%,要用POWER键开机.如果为0%,要用POWER键开机,然后拔掉电源线)

按CARTRIDGE次数:                                                默认设置:

7次                                                             0%

16次                                                            25%

15次                                                            50%

14次                                                            75%

bjc-85

EEPROM清除:

1.按住POWER和RESUME键,插电源线,初始化后手松开.

2.按住RESUME和CARTRIDGE键,按POWER键,直到听到1长1短的蜂鸣后.

3.根据下表,按CARTRIDGE,设置相应的废墨量.

4.按RESUM键,设置相应的废墨量.

5.用POWER键关机

(如果为25%,50%或75%,要用POWER键开机.如果为0%,要用POWER键开机,然后拔掉电源线)

按CARTRIDGE次数:                                                默认设置:

7次                                                             0%

16次                                                            25%

15次                                                            50%

14次                                                            75%